Radiant Barrier Insulation

Product Details:

Aluminium Non Woven Aluminium:-- 

 

Constructio

5 to 7 layer co- extruded composite material made from UV & FR reinforced PP non woven fabric 

with both se highly reflective Aluminium foil

 

Foil Backed Insulation Non-Woven Fabric: -

Our Oceanic Foil Pack ANWA is consist of Nonwoven fabric which is a fabric-like material made from long fibers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminium foil as the outer surface laminated together by LDPE acrylic adhesive, this foil insulation radiant barrier is light weight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.

 

Product Benefits

·         Eco-friendly, environment friendly and radiant barrier.

·         PE woven fabric provides high tensile strength and durability

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

Additional Information:

• Delivery Time: 7 Working Days

Product Details:

Radiant Barrier: -

 

An aluminium film will be placed between the roof tiles and the structure of the roof. This film shall be made of synthetic structure (not paper based) to resist high moisture environment. Its reflective face will be placed up both side and will be of pure aluminium (not metallised) for a radiation reflection higher than 95%.

 

On Open Structures: -

 

Radiant barrier will fixed between the rafters and the battens. Ideally a counter-batten solution should be implemented.

 

On concrete decks: -

 

Radiant barrier will be located between the concrete deck and the roof tiles. It will be maintained by the weight of the roof tiles.

 

Water-proofing: -

 

For an extra waterproofing protection with radiant barriers, the rolls will be laid horizontally, from bottom to top. An overlapping of minimum 20cm should be respected and rolls should be solidarized together with specific aluminium tapes.

 

Usage: -

It is economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation, under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products.

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Aluminium Fiberglass

Construction

3 to 5 layer co- extruded composite material made from Fibre glass cloth or fabric or 

Mesh laminated with highly reflective al foil.

 

Application:-

Oceanic Foil Pack AFG is mainly used in automobile for pipe insulation, and also in HVAC system, roofs, 

ceilings, walls, ducts and pipes, basements, water heaters, crawl spaces, and garages in all types of residential,

industrial, commercial and agricultural buildings. And it works well in areas with cool, warm, hot, and
humid climates.

 

Features: -

97% reflecting rate, could reflect most solar energy effectively and barrier radiant effectively; light 

weight will not add more burden to carrier; meanwhile fantastic durable because of glass fiber mesh

is strong enough; will not corrupt by moisture because of 100% Inorganic raw materials was taken to produce
it; pliable and tough flexible easy to be installed from any angle

 

Packaging Details:

Core ID: 76mm (3inch) Standard

length: 250 mtrs, Other lengths available On request

Thickness tolerance: +/-7% Maximum

1220mm & 1520mm

Additional Information:

• Delivery Time: 7 working days

Product Details:

Radiant Barrier: -

 

An aluminium film will be placed between the roof tiles and the structure of the roof. This film shall be made of synthetic structure (not paper based) to resist high moisture environment. Its reflective face will be placed up both side and will be of pure aluminium (not metallised) for a radiation reflection higher than 95%.

 

On Open Structures: -

 

Radiant barrier will fixed between the rafters and the battens. Ideally a counter-batten solution should be implemented.

 

On concrete decks: -

 

Radiant barrier will be located between the concrete deck and the roof tiles. It will be maintained by the weight of the roof tiles.

 

Water-proofing: -

 

For an extra waterproofing protection with radiant barriers, the rolls will be laid horizontally, from bottom to top. An overlapping of minimum 20cm should be respected and rolls should be solidarized together with specific aluminium tapes.

 

Usage: -

It is economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation, under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products.

Product Details:

Metalized woven Metalized Fabric

 

Construction: -

5 to 7 layer co- extruded composite material made from UV & FR reinforced woven fabric 

with both side special highly reflective metalized film.

 

Applications: -

Our Oceanic Foil Pack Metalized Woven Metalized Fabric are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

 

Product Benefits:

·         Eco-friendly, environment friendly and radiant barrier.

·         Aluminium foil woven fabric as a radiant barrier stops up to 97% of radiant heat transfer which improves the performance of the insulating material

·         PE woven fabric provides high tensile strength and durability

·         Aluminium foil woven fabric provides an efficient, space saving, and healthy method of temperature control and energy savings.

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

Additional Information:

• Delivery Time: 7 Working Days

Product Details:

Foil Scrim Kraft Both Side Foil Insulation Material

35 to 7 layer co- extruded composite material made of Fiberglass Rainforced mesh in Kraft paper with two side special highly reflective aluminium foil.

 

Applications

Our Oceanic Foil Pack Foil Kraft ( FSK Both Side Aluminium )insulation are mainly used as aluminium foil roof insulation, reflective foil wall insulation and also could be applied as finishes onto rock wool, glass wool etc. Our product is used as a moisture vapor barrier facing in air conditioning ductworks and cold rooms. This flexible thermal insulation sheets also service as energy insulating barrier in aid duct and HVAC sys- tem.

 

Features

High reflected rate 97% aluminium foil as outer surface could reflect solar light and block thermal radiant energy; Kraft as liner made it much stronger than single layer of pure aluminium foil, could be fold- ed into any shape so as to install easily.

 

 

Additional Information:

• Delivery Time: 7 Working Days

Product Details:

Metallized Woven Fabric Material

 

Construction

3 to 5 layer co- extruded composite material made from UV & FR reinforced PP woven fabric

with one side special highly reflective metalized film.

 

Applications

Our Oceanic Foil Pack METW insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

 

Product Benefits

·         Eco-friendly, environment friendly and radiant barrier.

·         PE woven fabric provides high tensile strength and durability

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

 

Additional Information:

• Delivery Time: 12 Working Days

Product Details:

Metalized woven Metalized Fabric

 

Construction: -

5 to 7 layer co- extruded composite material made from UV & FR reinforced woven fabric 

with both side special highly reflective metalized film.

 

Applications: -

Our Oceanic Foil Pack Metalized Woven Metalized Fabric are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

 

Product Benefits:

·         Eco-friendly, environment friendly and radiant barrier.

·         Aluminium foil woven fabric as a radiant barrier stops up to 97% of radiant heat transfer which improves the performance of the insulating material

·         PE woven fabric provides high tensile strength and durability

·         Aluminium foil woven fabric provides an efficient, space saving, and healthy method of temperature control and energy savings.

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Metalized woven Metalized Fabric

 

Construction: -

5 to 7 layer co- extruded composite material made from UV & FR reinforced woven fabric 

with both side special highly reflective metalized film.

 

Applications: -

Our Oceanic Foil Pack Metalized Woven Metalized Fabric are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

 

Product Benefits:

·         Eco-friendly, environment friendly and radiant barrier.

·         Aluminium foil woven fabric as a radiant barrier stops up to 97% of radiant heat transfer which improves the performance of the insulating material

·         PE woven fabric provides high tensile strength and durability

·         Aluminium foil woven fabric provides an efficient, space saving, and healthy method of temperature control and energy savings.

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

Additional Information:

• Delivery Time: 7 Working Days

Product Details:

Metallized Woven Fabric Material

 

Construction

3 to 5 layer co- extruded composite material made from UV & FR reinforced PP woven fabric

with one side special highly reflective metalized film.

 

Applications

Our Oceanic Foil Pack METW insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

 

Product Benefits

·         Eco-friendly, environment friendly and radiant barrier.

·         PE woven fabric provides high tensile strength and durability

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

 

Additional Information:

• Delivery Time: 12 Working Days

Product Details:

5 to 7 layer co- extruded composite material made from UV & FR reinforced woven fabric 

with both side special highly reflective metalized film.

Applications: -

Our Oceanic Foil Pack Metalized Woven Metalized Fabric are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

Product Benefits:

·Eco-friendly, environment friendly and radiant barrier.

·Aluminium foil woven fabric as a radiant barrier stops up to 97% of radiant heat transfer which improves the performance of the insulating material

·PE woven fabric provides high tensile strength and durability

·Aluminium foil woven fabric provides an efficient, space saving, and healthy method of temperature control and energy savings.

·Lightweight and easy handling and low cost waterproof type.

·Never use chemical bonding materials.

·PE woven fabric is used you can saw it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·For heavier basic weight based on order are also available.

·Different lengths and basic weight are available.

Additional Information:

• Delivery Time: 15 TO 20 WORKING DYAS

Product Details:

Metalized woven Metalized Fabric

 

Construction: -

5 to 7 layer co- extruded composite material made from UV & FR reinforced woven fabric 

with both side special highly reflective metalized film.

 

Applications: -

Our Oceanic Foil Pack Metalized Woven Metalized Fabric are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

 

Product Benefits:

·         Eco-friendly, environment friendly and radiant barrier.

·         Aluminium foil woven fabric as a radiant barrier stops up to 97% of radiant heat transfer which improves the performance of the insulating material

·         PE woven fabric provides high tensile strength and durability

·         Aluminium foil woven fabric provides an efficient, space saving, and healthy method of temperature control and energy savings.

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Metallized Woven Fabric Material

 

Construction

3 to 5 layer co- extruded composite material made from UV & FR reinforced PP woven fabric

with one side special highly reflective metalized film.

 

Applications

Our Oceanic Foil Pack METW insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

 

Product Benefits

·         Eco-friendly, environment friendly and radiant barrier.

·         PE woven fabric provides high tensile strength and durability

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

 

Additional Information:

• Delivery Time: 12 Working Days

Product Details:

Radiant Barrier: -

 

An aluminium film will be placed between the roof tiles and the structure of the roof. This film shall be made of synthetic structure (not paper based) to resist high moisture environment. Its reflective face will be placed up both side and will be of pure aluminium (not metallised) for a radiation reflection higher than 95%.

 

On Open Structures: -

 

Radiant barrier will fixed between the rafters and the battens. Ideally a counter-batten solution should be implemented.

 

On concrete decks: -

 

Radiant barrier will be located between the concrete deck and the roof tiles. It will be maintained by the weight of the roof tiles.

 

Water-proofing: -

 

For an extra waterproofing protection with radiant barriers, the rolls will be laid horizontally, from bottom to top. An overlapping of minimum 20cm should be respected and rolls should be solidarized together with specific aluminium tapes.

 

Usage: -

It is economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation, under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products.

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Radiant Barrier: -

 

An aluminium film will be placed between the roof tiles and the structure of the roof. This film shall be made of synthetic structure (not paper based) to resist high moisture environment. Its reflective face will be placed up both side and will be of pure aluminium (not metallised) for a radiation reflection higher than 95%.

 

On Open Structures: -

 

Radiant barrier will fixed between the rafters and the battens. Ideally a counter-batten solution should be implemented.

 

On concrete decks: -

 

Radiant barrier will be located between the concrete deck and the roof tiles. It will be maintained by the weight of the roof tiles.

 

Water-proofing: -

 

For an extra waterproofing protection with radiant barriers, the rolls will be laid horizontally, from bottom to top. An overlapping of minimum 20cm should be respected and rolls should be solidarized together with specific aluminium tapes.

 

Usage: -

It is economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation, under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products.

Additional Information:

• Delivery Time: 12 Working Days

Product Details:

Radiant Barrier: -

 

An aluminium film will be placed between the roof tiles and the structure of the roof. This film shall be made of synthetic structure (not paper based) to resist high moisture environment. Its reflective face will be placed up both side and will be of pure aluminium (not metallised) for a radiation reflection higher than 95%.

 

On Open Structures: -

 

Radiant barrier will fixed between the rafters and the battens. Ideally a counter-batten solution should be implemented.

 

On concrete decks: -

 

Radiant barrier will be located between the concrete deck and the roof tiles. It will be maintained by the weight of the roof tiles.

 

Water-proofing: -

 

For an extra waterproofing protection with radiant barriers, the rolls will be laid horizontally, from bottom to top. An overlapping of minimum 20cm should be respected and rolls should be solidarized together with specific aluminium tapes.

 

Usage: -

It is economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation, under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products.

Additional Information:

• Delivery Time: 12 Working Days

Product Details:

Metalized Woven PE

 

Construction

3 to 5 layer co extruded composite material made from UV & FR reinforced PP woven fabric with one side special highly reflective metalized film.

 

Applications

Our Oceanic Foil Pack Metalized Woven PE insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine. It is also used inside CFB in packaging for protecting product from heat.

 

Product Benefits

·         Eco-friendly, environment friendly and radiant barrier.

·         PE woven fabric provides high tensile strength and durability

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Metalized Woven PE

 

Construction

3 to 5 layer co extruded composite material made from UV & FR reinforced PP woven fabric with one side special highly reflective metalized film.

 

Applications

Our Oceanic Foil Pack Metalized Woven PE insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine. It is also used inside CFB in packaging for protecting product from heat.

 

Product Benefits

·         Eco-friendly, environment friendly and radiant barrier.

·         PE woven fabric provides high tensile strength and durability

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

Additional Information:

• Delivery Time: 7 Working Days

Product Details:

Aluminium Non Woven Aluminium:-- 

 

Constructio

5 to 7 layer co- extruded composite material made from UV & FR reinforced PP non woven fabric 

with both se highly reflective Aluminium foil

 

Foil Backed Insulation Non-Woven Fabric: -

Our Oceanic Foil Pack ANWA is consist of Nonwoven fabric which is a fabric-like material made from long fibers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminium foil as the outer surface laminated together by LDPE acrylic adhesive, this foil insulation radiant barrier is light weight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.

 

Product Benefits

·         Eco-friendly, environment friendly and radiant barrier.

·         PE woven fabric provides high tensile strength and durability

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Metalize Non-Woven Metalize Film :-

 

5 to 7 layer co- extruded composite material made from UV & FR reinforced PP non woven fabric

with both side special highly reflective metalized film.

 

Nonwoven fabric which is a fabric-like material made from long fibers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminium foil as the outer surface laminated together by LDPE / acrylic adhesive, this foil insulation radiant barrier is light weight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.

It is light in weight, excellent tear-resistance & good puncture resistance & excellent water vapor resistance and higher tensile strength. It is easy to handle during construction. Anti-aging, peel strength, and printable

 

Insulation Usage:

Our Oceanic Foil Pack MNWM It is used widely to make car cap to Reflective Sunshine & in Roof, floor, wall, pack food for heat Retaining, medical & sanitary, poultry industry & agriculture, construction & daily-used products such as the agricultural plant covers, roof waterproof material, disposable items for medical and industrial applications, liners for furniture, packing material, shopping bags, suit and garment cover, industrial protective coveralls, garment accessory materials, bed articles,

 

Medical and sanitary articles as well as family and hotel consume articles, especially for heat insulation, thermal insulation and construction and other fields.

 

Other Packaging Usage:

Metalized film / Al Foil Laminated non-woven fabric used in flexible packaging, waterproof material, decorative material, foodstuff packaging, barrier material, Low heat shrinkage area, high tensile strength requirement. Aluminium coating is well-proportioned has very high lusted degree, light reflectivity reach 98%, Suitable for yarn, cling packaging, cosmetic packaging and tobacco and liquor packaging.

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Metallized Woven Fabric Material

 

Construction

3 to 5 layer co- extruded composite material made from UV & FR reinforced PP woven fabric

with one side special highly reflective metalized film.

 

Applications

Our Oceanic Foil Pack METW insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

 

Product Benefits

·         Eco-friendly, environment friendly and radiant barrier.

·         PE woven fabric provides high tensile strength and durability

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

 

Additional Information:

• Delivery Time: 12 to 15 working days

Product Details:

Metalized Woven PE

 

Construction

3 to 5 layer co extruded composite material made from UV & FR reinforced PP woven fabric with one side special highly reflective metalized film.

 

Applications

Our Oceanic Foil Pack Metalized Woven PE insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine. It is also used inside CFB in packaging for protecting product from heat.

 

Product Benefits

·         Eco-friendly, environment friendly and radiant barrier.

·         PE woven fabric provides high tensile strength and durability

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Metalized Woven PE

 

Construction

3 to 5 layer co extruded composite material made from UV & FR reinforced PP woven fabric with one side special highly reflective metalized film.

 

Applications

Our Oceanic Foil Pack Metalized Woven PE insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine. It is also used inside CFB in packaging for protecting product from heat.

 

Product Benefits

·         Eco-friendly, environment friendly and radiant barrier.

·         PE woven fabric provides high tensile strength and durability

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Metalize Non-Woven Metalize Film :-

 

5 to 7 layer co- extruded composite material made from UV & FR reinforced PP non woven fabric

with both side special highly reflective metalized film.

 

Nonwoven fabric which is a fabric-like material made from long fibers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminium foil as the outer surface laminated together by LDPE / acrylic adhesive, this foil insulation radiant barrier is light weight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.

It is light in weight, excellent tear-resistance & good puncture resistance & excellent water vapor resistance and higher tensile strength. It is easy to handle during construction. Anti-aging, peel strength, and printable

 

Insulation Usage:

Our Oceanic Foil Pack MNWM It is used widely to make car cap to Reflective Sunshine & in Roof, floor, wall, pack food for heat Retaining, medical & sanitary, poultry industry & agriculture, construction & daily-used products such as the agricultural plant covers, roof waterproof material, disposable items for medical and industrial applications, liners for furniture, packing material, shopping bags, suit and garment cover, industrial protective coveralls, garment accessory materials, bed articles,

 

Medical and sanitary articles as well as family and hotel consume articles, especially for heat insulation, thermal insulation and construction and other fields.

 

Other Packaging Usage:

Metalized film / Al Foil Laminated non-woven fabric used in flexible packaging, waterproof material, decorative material, foodstuff packaging, barrier material, Low heat shrinkage area, high tensile strength requirement. Aluminium coating is well-proportioned has very high lusted degree, light reflectivity reach 98%, Suitable for yarn, cling packaging, cosmetic packaging and tobacco and liquor packaging.

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Metalized Woven PE

 

Construction

3 to 5 layer co extruded composite material made from UV & FR reinforced PP woven fabric with one side special highly reflective metalized film.

 

Applications

Our Oceanic Foil Pack Metalized Woven PE insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine. It is also used inside CFB in packaging for protecting product from heat.

 

Product Benefits

·         Eco-friendly, environment friendly and radiant barrier.

·         PE woven fabric provides high tensile strength and durability

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Metalize Non-Woven Metalize Film :-

 

5 to 7 layer co- extruded composite material made from UV & FR reinforced PP non woven fabric

with both side special highly reflective metalized film.

 

Nonwoven fabric which is a fabric-like material made from long fibers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminium foil as the outer surface laminated together by LDPE / acrylic adhesive, this foil insulation radiant barrier is light weight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.

It is light in weight, excellent tear-resistance & good puncture resistance & excellent water vapor resistance and higher tensile strength. It is easy to handle during construction. Anti-aging, peel strength, and printable

 

Insulation Usage:

Our Oceanic Foil Pack MNWM It is used widely to make car cap to Reflective Sunshine & in Roof, floor, wall, pack food for heat Retaining, medical & sanitary, poultry industry & agriculture, construction & daily-used products such as the agricultural plant covers, roof waterproof material, disposable items for medical and industrial applications, liners for furniture, packing material, shopping bags, suit and garment cover, industrial protective coveralls, garment accessory materials, bed articles,

 

Medical and sanitary articles as well as family and hotel consume articles, especially for heat insulation, thermal insulation and construction and other fields.

 

Other Packaging Usage:

Metalized film / Al Foil Laminated non-woven fabric used in flexible packaging, waterproof material, decorative material, foodstuff packaging, barrier material, Low heat shrinkage area, high tensile strength requirement. Aluminium coating is well-proportioned has very high lusted degree, light reflectivity reach 98%, Suitable for yarn, cling packaging, cosmetic packaging and tobacco and liquor packaging.

Additional Information:

• Delivery Time: 7 Working Days

Product Details:

Metalize Non-Woven Metalize Film :-

 

5 to 7 layer co- extruded composite material made from UV & FR reinforced PP non woven fabric

with both side special highly reflective metalized film.

 

Nonwoven fabric which is a fabric-like material made from long fibers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminium foil as the outer surface laminated together by LDPE / acrylic adhesive, this foil insulation radiant barrier is light weight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.

It is light in weight, excellent tear-resistance & good puncture resistance & excellent water vapor resistance and higher tensile strength. It is easy to handle during construction. Anti-aging, peel strength, and printable

 

Insulation Usage:

Our Oceanic Foil Pack MNWM It is used widely to make car cap to Reflective Sunshine & in Roof, floor, wall, pack food for heat Retaining, medical & sanitary, poultry industry & agriculture, construction & daily-used products such as the agricultural plant covers, roof waterproof material, disposable items for medical and industrial applications, liners for furniture, packing material, shopping bags, suit and garment cover, industrial protective coveralls, garment accessory materials, bed articles,

 

Medical and sanitary articles as well as family and hotel consume articles, especially for heat insulation, thermal insulation and construction and other fields.

 

Other Packaging Usage:

Metalized film / Al Foil Laminated non-woven fabric used in flexible packaging, waterproof material, decorative material, foodstuff packaging, barrier material, Low heat shrinkage area, high tensile strength requirement. Aluminium coating is well-proportioned has very high lusted degree, light reflectivity reach 98%, Suitable for yarn, cling packaging, cosmetic packaging and tobacco and liquor packaging.

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Aluminium Fiberglass

Construction

3 to 5 layer co- extruded composite material made from Fibre glass cloth or fabric or 

Mesh laminated with highly reflective al foil.

 

Application:-

Oceanic Foil Pack AFG is mainly used in automobile for pipe insulation, and also in HVAC system, roofs, 

ceilings, walls, ducts and pipes, basements, water heaters, crawl spaces, and garages in all types of residential,

industrial, commercial and agricultural buildings. And it works well in areas with cool, warm, hot, and
humid climates.

 

Features: -

97% reflecting rate, could reflect most solar energy effectively and barrier radiant effectively; light 

weight will not add more burden to carrier; meanwhile fantastic durable because of glass fiber mesh

is strong enough; will not corrupt by moisture because of 100% Inorganic raw materials was taken to produce
it; pliable and tough flexible easy to be installed from any angle

 

Packaging Details:

Core ID: 76mm (3inch) Standard

length: 250 mtrs, Other lengths available On request

Thickness tolerance: +/-7% Maximum

1220mm & 1520mm

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Aluminium Fiberglass

Construction

3 to 5 layer co- extruded composite material made from Fibre glass cloth or fabric or 

Mesh laminated with highly reflective al foil.

 

Application:-

Oceanic Foil Pack AFG is mainly used in automobile for pipe insulation, and also in HVAC system, roofs, 

ceilings, walls, ducts and pipes, basements, water heaters, crawl spaces, and garages in all types of residential,

industrial, commercial and agricultural buildings. And it works well in areas with cool, warm, hot, and
humid climates.

 

Features: -

97% reflecting rate, could reflect most solar energy effectively and barrier radiant effectively; light 

weight will not add more burden to carrier; meanwhile fantastic durable because of glass fiber mesh

is strong enough; will not corrupt by moisture because of 100% Inorganic raw materials was taken to produce
it; pliable and tough flexible easy to be installed from any angle

 

Packaging Details:

Core ID: 76mm (3inch) Standard

length: 250 mtrs, Other lengths available On request

Thickness tolerance: +/-7% Maximum

1220mm & 1520mm

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Aluminium Fiberglass

Construction

3 to 5 layer co- extruded composite material made from Fibre glass cloth or fabric or 

Mesh laminated with highly reflective al foil.

 

Application:-

Oceanic Foil Pack AFG is mainly used in automobile for pipe insulation, and also in HVAC system, roofs, 

ceilings, walls, ducts and pipes, basements, water heaters, crawl spaces, and garages in all types of residential,

industrial, commercial and agricultural buildings. And it works well in areas with cool, warm, hot, and
humid climates.

 

Features: -

97% reflecting rate, could reflect most solar energy effectively and barrier radiant effectively; light 

weight will not add more burden to carrier; meanwhile fantastic durable because of glass fiber mesh

is strong enough; will not corrupt by moisture because of 100% Inorganic raw materials was taken to produce
it; pliable and tough flexible easy to be installed from any angle

 

Packaging Details:

Core ID: 76mm (3inch) Standard

length: 250 mtrs, Other lengths available On request

Thickness tolerance: +/-7% Maximum

1220mm & 1520mm

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Aluminium Non Woven Aluminium:-- 

 

Constructio

5 to 7 layer co- extruded composite material made from UV & FR reinforced PP non woven fabric 

with both se highly reflective Aluminium foil

 

Foil Backed Insulation Non-Woven Fabric: -

Our Oceanic Foil Pack ANWA is consist of Nonwoven fabric which is a fabric-like material made from long fibers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminium foil as the outer surface laminated together by LDPE acrylic adhesive, this foil insulation radiant barrier is light weight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.

 

Product Benefits

·         Eco-friendly, environment friendly and radiant barrier.

·         PE woven fabric provides high tensile strength and durability

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Aluminium Woven Insulation Material

 

Construction

3 to 5 layer co- extruded composite material made from UV & FR reinforced PP woven fabric with one side highly reflective Aluminium foil.

 

Applications

Our Oceanic Foil Pack AW aluminium foil PE fabric insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

 

Product Benefits

·         Eco friendly, environment friendly and radiant barrier.

·         Aluminium foil woven fabric as a radiant barrier stops up to 97% of radiant heat transfer which improves the performance of the insulating material

·         PE woven fabric provides high tensile strength and durability

·         Aluminium foil woven fabric provides an efficient, space saving, and healthy method of temperature control and energy savings.

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

 

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Metalize Non-Woven Metalize Film :-

 

5 to 7 layer co- extruded composite material made from UV & FR reinforced PP non woven fabric

with both side special highly reflective metalized film.

 

Nonwoven fabric which is a fabric-like material made from long fibers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminium foil as the outer surface laminated together by LDPE / acrylic adhesive, this foil insulation radiant barrier is light weight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.

It is light in weight, excellent tear-resistance & good puncture resistance & excellent water vapor resistance and higher tensile strength. It is easy to handle during construction. Anti-aging, peel strength, and printable

 

Insulation Usage:

Our Oceanic Foil Pack MNWM It is used widely to make car cap to Reflective Sunshine & in Roof, floor, wall, pack food for heat Retaining, medical & sanitary, poultry industry & agriculture, construction & daily-used products such as the agricultural plant covers, roof waterproof material, disposable items for medical and industrial applications, liners for furniture, packing material, shopping bags, suit and garment cover, industrial protective coveralls, garment accessory materials, bed articles,

 

Medical and sanitary articles as well as family and hotel consume articles, especially for heat insulation, thermal insulation and construction and other fields.

 

Other Packaging Usage:

Metalized film / Al Foil Laminated non-woven fabric used in flexible packaging, waterproof material, decorative material, foodstuff packaging, barrier material, Low heat shrinkage area, high tensile strength requirement. Aluminium coating is well-proportioned has very high lusted degree, light reflectivity reach 98%, Suitable for yarn, cling packaging, cosmetic packaging and tobacco and liquor packaging.

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Woven Sack based radiant barrier is made of woven sack laminated with foil on both side along with co -extrusion ldpe for heavy and better bond strength comes in 1200 mm - 1500 mm size with 140-180 gsm

Additional Information:

• Delivery Time: 15 to 20 working days

Product Details:

Both side foil or metalize laminated on pure vargin hdpe Woven Sack fabric  with the help of co extrusion ldpe to heavy strength it is 5 to 7 layer customise as per requirement higly reflective and radiant barrier material used for roof insluation 

Additional Information:

• Delivery Time: 15 TO 20 WORKING DAYS

Product Details:

Perforated Radiant barrier is made of woven fabric vargin hdpe laminated with foil and co extrusion ldpe with heavy bond strength with pattern perforated width is 1200 mm to 1500 mm gsm customise as per customer requirement 140-180 gsm used for roof insulation 

Additional Information:

• Delivery Time: 15 TO 20 WORKING DAYS

Product Details:

Radiant Barrier is made of foil laminated on both side of woven sack pure vargin hdpe with co extrusion ldpe for higher bond strength it is 5-7 layer with 140-200 gsm width 1200 mm-1500 mm customise as per customer requirement

Additional Information:

• Delivery Time: 15 TO 20 WORKING DAYS

Product Details:

Aluminium Woven Aluminium

Construction

5 to 7 layer co- extruded composite material made from UV & FR reinforced PP woven fabric with both side highly reflective Aluminium foil

 

Our Oceanic Foil Pack FWF aluminium foil PE fabric insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

 

Product Benefits

·         Eco friendly, environment friendly and radiant barrier.

·         Aluminium foil woven fabric as a radiant barrier stops up to 97% of radiant heat transfer which improves the performance of the insulating material

·         PE woven fabric provides high tensile strength and durability

·         Aluminium foil woven fabric provides an efficient, space saving, and healthy method of temperature control and energy savings.

·         Lightweight and easy handling and low cost.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

Additional Information:

• Delivery Time: 7 Working Days

Product Details:

Aluminium Non Woven Aluminium:-- 

 

Constructio

5 to 7 layer co- extruded composite material made from UV & FR reinforced PP non woven fabric 

with both se highly reflective Aluminium foil

 

Foil Backed Insulation Non-Woven Fabric: -

Our Oceanic Foil Pack ANWA is consist of Nonwoven fabric which is a fabric-like material made from long fibers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminium foil as the outer surface laminated together by LDPE acrylic adhesive, this foil insulation radiant barrier is light weight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.

 

Product Benefits

·         Eco-friendly, environment friendly and radiant barrier.

·         PE woven fabric provides high tensile strength and durability

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

Additional Information:

• Delivery Time: 15 Working Days

Product Details:

Metalized Woven PE

 

Construction

3 to 5 layer co extruded composite material made from UV & FR reinforced PP woven fabric with one side special highly reflective metalized film.

 

Applications

Our Oceanic Foil Pack Metalized Woven PE insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine. It is also used inside CFB in packaging for protecting product from heat.

 

Product Benefits

·         Eco-friendly, environment friendly and radiant barrier.

·         PE woven fabric provides high tensile strength and durability

·         Lightweight and easy handling and low cost waterproof type.

·         Never use chemical bonding materials.

·         PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.

·         For heavier basic weight based on order are also available.

·         Different lengths and basic weight are available.

Additional Information:

• Delivery Time: 15 Working Days