Metalize Polyester Film

Product Details:

Metallized film Laminated Material

Oceanic Foil Pack was started in 2014 for the manufacture and marketing of Metallised films (or metallized films) based packaging. The company is equipped with Latest Extrusion laminations of Metallised films (or metallized films) with paper, board and various plastic films. Beside they do have in–house Auxiliaries facility. Oceanic Foil Pack has the capacity for processing 100 Tons of foil in assorted thickness a month.

Metallised films (or metallized films) are polymer films coated with a thin layer of metal, usually aluminium. They offer the glossy metallic appearance of an aluminium foil at a reduced weight and cost. Metallised films are widely used for decorative purposes and food packaging, and also for speciality applications including insulation and electronics

Manufacture

Metallisation is performed using a physical vapour deposition process. Aluminium is the most common metal used for deposition, but other metals such as nickel or chromium are also used. The metal is heated and evaporated under vacuum. This condenses on the cold polymer film, which is unwound near the metal vapour source. This coating is much thinner than a metal foil could be made, in the range of 0.5 micrometres [1]. This coating will not fade or discolour over time. While oriented polypropylene and PET are the most common films used for metallisation, nylon, polyethylene and cast polypropylene are also used.

Properties

Metallised films have a reflective silver surface similar to aluminium foil. The coating also reduces the permeability of the film to light, water and oxygen. The properties of the film remain, such as higher toughness, the ability to be heat sealed, and a lower density at a lower cost than an aluminium foil. This gives metallised films some advantages over aluminium foil and aluminium foil laminates. It was thought that metallised films would become a replacement for aluminium foil laminates, but current films still cannot match the barrier properties of foil. Some very high barrier metallised films are available using EVOH, but are not yet cost effective against foil laminates.

Decoration

Metallised films used for balloons Metallised films were first used for decorative purposes as Christmas tinsel, and continue to be used for items such as wrappers and ribbons. The metallic helium filled novelty balloons given as gifts are made of metallised Bo PET and often called Mylar balloons commercially.

Additional Information:

• Delivery Time: 7 Working Days

Product Details:

Metalized Film laminated with woven fabrics

It is light in weight but excellent tear-resistance & good puncture resistance. It is easy to handle during construction. It is used widely to make car cap to reflective sunshine & in roof, floor, wall, pack food for heat retaining. This combination provides excellent water vapour resistance and higher tensile strength

Characteristics:

·         Perfect uniformity, test on line in process. High barrier

·         The material provides excellent insulation: reflects up to 97% of radiant energy in addition to reflective sheeting resisting other types of heat transfer from conduction, convection, and radiation. The side of metalized PET forms an effective barrier against moisture, air currents and vapors.

·         Clean, thin and light weight

·         Outstanding safety and environmentally friendly.

·         Easy to install, high efficiency.

·         Cost effective and versatile.

Usage:

It is economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation, under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products.

Types:

1.Metalized PET PE woven fabric/Metalized PET. 2. Metalized PET PE⁄PE woven fabric. 3.Metalized PETPE PE woven fabric PE

Additional Information:

• Delivery Time: 7 Working Days

Product Details:

Metalized Poly with Paper (MET Film + PE + Paper)

Optimizing the latest technology, we manufacture a range of paper ⁄ PE ⁄ met pet laminates that are used in various industries for packaging purposes. These laminates provide a high durability to the products and also add elegance owing to their attractive Color combinations. We offer these a various thickness and sizes as well as the required needs of the clients.

We manufacture and export a wide variety of metalized poly with paper which can be used for flexible laminates and wrapping of various products in soap and detergent industry. Our range is laminated with the highest quality and consistency that provides barrier protection against ultra violet lighting and moisture. Further, these can also be customized as per the clients' needs and are available at industry leading prices

Description:

Width: 100 mm to 2000 mm
PE Coating: 10 to 50 microns
Thickness: 43GSM to 128GSM
Usage : Medicine packing, Food packing, Gift wrapping, Cosmetic decoration etc.

Features:

High gloss, strong metallic look, perfect metallization.

Smooth Surface and excellent aluminium adhesion.

With excellent adhesion ability with ink.

Offset printing, gravure printing and flexible printing, etc.

Excellent properties when use for labels.

Additional Information:

• Delivery Time: 15 to 20 working days